Why won't my Honda CBX750 run properly?
Por um escritor misterioso
Descrição
Q. I’ve just got an ’86-reg Honda CBX750, it had blowing header pipes which I’ve fixed. My problem is that when I try to ride it after letting it warm up the middle two cylinders splutter then cut out.
I give it two minutes and it starts up fine, but won’t take any load. Dave Wood, Bournemouth
A. Unfortunately it sounds like you may have bought a bit of a pig in a poke. The bike is now 25 years old, so things do start to go wrong, it’s inevitable. Are you sure it’s the two middle cylinders and not one? If you decide to keep the bike, then check the coil for cylinders two and three as well as the HT leads and plug caps.
If the problem isn’t there, then check the twin pulse pick-ups as they used to be one of the fewfaults this bike had back in its day. Also check the plug connector from the main loom to the coils (check for corrosion and continuity), as it is a separate piece of loom.
Drain the carb float bowls into a clean bowl to see if there is any water or debris in there too. If
Think Big: A beastly CBX1000 from Purpose Built Moto
1985 VF700F Vintage Honda Twins
Lost Identity, Can You Help? 1983 Moriwaki Framed Honda CBX750 (Maybe) - Rare SportBikesForSale
Why won't my Honda CBX750 run properly?
Custom Honda CBX 750 Motorcycle Print Watercolor Motorcycle
hard to start cb750 : r/HondaCB
Free* Honda Project: GL500 Interstate-Page 3, Motorcycles and Bicycles forum
1984 Honda CBX750 - Will It Run ? - Engine repair - Part 4
Troubleshooting a No-Start Honda Motorcycle
Custom Honda CBX 750 Motorcycle Print Watercolor Motorcycle
de
por adulto (o preço varia de acordo com o tamanho do grupo)